Description of BS EN ISO 19901-2:2022 2022

This document contains requirements for defining the seismic design procedures and criteria for offshore structures; guidance on the requirements is included in Annex A. The requirements focus on fixed steel offshore structures and fixed concrete offshore structures. The effects of seismic events on floating structures and partially buoyant structures are briefly discussed. The site-specific assessment of jack-ups in elevated condition is only covered in this document to the extent that the requirements are applicable. Only earthquake-induced ground motions are addressed in detail. Other geologically induced hazards such as liquefaction, slope instability, faults, tsunamis, mud volcanoes and shock waves are mentioned and briefly discussed. The requirements are intended to reduce risks to persons, the environment, and assets to the lowest levels that are reasonably practicable. This intent is achieved by using: a) seismic design procedures which are dependent on the exposure level of the offshore structure and the expected intensity of seismic events; b) a two-level seismic design check in which the structure is designed to the ultimate limit state (ULS) for strength and stiffness and then checked to abnormal environmental events or the abnormal limit state (ALS) to ensure that it meets reserve strength and energy dissipation requirements. Procedures and requirements for a site-specific probabilistic seismic hazard analysis (PSHA) are addressed for offshore structures in high seismic areas and/or with high exposure levels. However, a thorough explanation of PSHA procedures is not included. Where a simplified design approach is allowed, worldwide offshore maps, which are included in Annex B, show the intensity of ground shaking corresponding to a return period of 1 000 years. In such cases, these maps can be used with corresponding scale factors to determine appropriate seismic actions for the design of a structure, unless more detailed information is available from local code or site-specific study. NOTE      For design of fixed steel offshore structures, further specific requirements and recommended values of design parameters (e.g. partial action and resistance factors) are included in ISO 19902, while those for fixed concrete offshore structures are contained in ISO 19903. Seismic requirements for floating structures are contained in ISO 19904, for site-specific assessment of jack-ups and other MOUs in the ISO 19905 series, for arctic structures in ISO 19906 and for topsides structures in ISO 19901?3.

Standard Number	BS EN ISO 19901-2:2022
Title	Petroleum and natural gas industries. Specific requirements for offshore structures - Seismic design procedures and criteria
Status	Under Review
Publication Date	2022-08-19
Replaces	BS EN ISO 19901-2:2017
Identical National Standard Of	ENISO 19901-2, ISO 19901-2
Descriptors	Safety engineering, Natural disasters, Earthquakes, Concretes, Natural gas extraction, Earthquake-resistant design, Structural design, Steels, Offshore construction works, Maritime structures, Petroleum technology, Structures, Hazard prevention in buildings, Construction engineering works, Petroleum extraction, Industrial, Natural gas, Drilling (mineral extraction), Design
ICS	75.180.10 Exploratory, drilling and extraction equipment
Committee	B/525/12
ISBN	978 0 539 03955 9
Publisher	BSI
Pages	64

About BSI

BSI Group, also known as the British Standards Institution is the national standards body of the United Kingdom. BSI produces technical standards on a wide range of products and services and also supplies certification and standards-related services to businesses.