Abstract

This specification covers the construction of marine log desks of steel construction with cabinets that are to be provided with two adjustable shelves. Sheet metal shall be of commercial quality and the metal components shall be joined by welding or gluing with a structural adhesive to prevent racking of chest during handling. Spotwelds shall be spaced at a specific distance wherein visible spotwelds higher than the general surface of the adjacent metal shall be ground flush while visible spotweld depressions shall be spot filled and sanded flush. To prevent buckling or oil-canning, side panels shall be stiffened suitably. Sound deadening shall be vermin proof and shall be applied to back and inner face of sides of chest. A furniture base shall also be provided to secure the log desk to deck.

This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.

1. Scope

1.1 This specification covers the construction of marine log desks of steel construction with cabinets.

1.2 Values stated in inch-pound units are to be regarded as the standard. The metric equivalents, given in parentheses, are provided for information only.

2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.

ASTM Standards

A366/A366M Specification for Commercial Steel (CS) Sheet, Carbon, (0.15 Maximum Percent) Cold-Rolled

D907 Terminology of Adhesives

F782 Specification for Doors, Furniture, Marine

F825 Specification for Drawers, Furniture, Marine, Steel

F826 Specification for Tops, Furniture, Marine, Steel

American Institute of Steel Construction Manual

Keywords

cabinets; log desks; marine furniture; marine log desks; steel log desks; Desks; Furniture--marine applications; Log desks (for ships); Round tube; Shipboard materials/applications--specifications; Shipbuilding steel materials--specifications ;

ICS Code

ICS Number Code 47.020.70 (Navigation and control equipment)

DOI: 10.1520/F0823-93R10

ASTM International is a member of CrossRef.

ASTM F823