ASTM F2527-05
Historical Standard: ASTM F2527-05 Standard Specification for Wrought Seamless and Welded and Drawn Cobalt Alloy Small Diameter Tubing for Surgical Implants (UNS R30003, UNS R30008, UNS R30035, UNS R30605, and UNS R31537)
SUPERSEDED (see Active link, below)
ASTM F2527
1. Scope
1.1 This specification covers the requirements for wrought seamless and welded and drawn cobalt alloy small diameter tubing used for the manufacture of surgical implants. Material shall conform to the applicable requirements of Specifications F 90, F 562, F 688, F 1058 or F 1537, Alloy 1. This specification addresses those product variables that differentiate small diameter medical tubing from the bar, wire, sheet and strip product forms covered in these specifications.
1.2 This specification applies to straight length tubing with 0.250 in. (6.3 mm) and smaller nominal outside diameter (OD) and 0.030 in. (0.76 mm) and thinner nominal wall thickness.
1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
ASTM Standards
SI10 American National Standard for Use of the International System of Units (SI): The Modern Metric System
Keywords
cobalt alloy; small diameter, metals (for surgical implant); surgical applications, tubing; surgical implants; tubing; Cobalt alloys (for surgical implants)--specifications; Surgical implants--specifications; Tubing; UNS R30003; UNS R30008; UNS R30035 (Co-Ni-Cr-Mo alloy, MP-35-N); UNS R30605 (Co-Cr-Ni-W alloy, L-605); UNS R31537 (Co-Cr-Mo alloy);
ICS Code
ICS Number Code 11.040.40 (Implants for surgery, prothetics and orthotics)
DOI: 10.1520/F2527-05
ASTM International is a member of CrossRef.
