1. Scope

1.1 This specification covers nails, spikes, staples, and other driven fasteners, as listed in Fastener ductility information is presented in and dimensional information in Table 1.

NoteFastener ductility information is presented in Table 2 and dimensional information in Tables 3-63.

1.2 Fasteners described in this specification are driven by hand tool, power tool, or mechanical device in single or multiple strikes and may be positioned for striking by hand, tool, or machine.

1.3 The values stated in inch-pound units are to be regarded as the standard.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.

ASTM Standards

A153/A153M Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware

A510M Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel (Metric)

A641/A641M Specification for Zinc-Coated (Galvanized) Carbon Steel Wire

B695 Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel

F547 Terminology of Nails for Use with Wood and Wood-Base Materials

F592 Terminology of Collated and Cohered Fasteners and Their Application Tools

F680 Test Methods for Nails

F1575 Test Method for Determining Bending Yield Moment of Nails

Keywords

diameter; driven fasteners; head; length; nails; point; spikes; staples; [pick;t00003;0;here]>[pick;t00004;0;here]>[pick;t00005;0;here]>[pick;t00006;0;here]>[pick;t00007;0;here]>[pick;t00008;0;here]>[pick;t00009;0;here]>[pick;t00010;0;here]>[pick;t00011;0;here]>[pick;t00012;0;here]>[pick;t00013;0;here]>[pick;t00014;0;here]>[pick;t00015;0;here]>[pick;t00016;0;here]>[pick;t00017;0;here]>[pick;t00018;0;here]>[pick;t00019;0;here]>[pick;t00020;0;here]>[pick;t00021;0;here]>[pick;t00022;0;here]>[pick;t00023;0;here]>[pick;t00024;0;here]>[pick;t00025;0;here]>[pick;t00026;0;here]>[pick;t00027;0;here]>[pick;t00028;0;here]>[pick;t00029;0;here]>[pick;t00030;0;here]>[pick;t00031;0;here]>[pick;t00032;0;here]>[pick;t00033;0;here]>[pick;t00333;0;here]>[pick;t00034;0;here]>[pick;t00035;0;here]>[pick;t00036;0;here]>[pick;t00037;0;here]>[pick;t00038;0;here]>[pick;t00039;0;here]>[pick;t00040;0;here]>[pick;t00041;0;here]>[pick;t00042;0;here]>[pick;t00043;0;here]>[pick;t00044;0;here]>[pick;t00045;0;here]>[pick;t00067;0;here]>[pick;t00046;0;here]>[pick;t00047;0;here]>[pick;t00048;0;here]>[pick;t00049;0;here]>[pick;t00050;0;here]>[pick;t00051;0;here]>[pick;t00052;0;here]>[pick;t00053;0;here]>[pick;t00054;0;here]>[pick;t00055;0;here]>[pick;t00056;0;here]>[pick;t00057;0;here]>[pick;t00058;0;here]>[pick;t00059;0;here]>[pick;t00066;0;here]>[pick;t00060;0;here]>[pick;t00061;0;here]>[pick;t00062;0;here]>[pick;t00063;0;here]>[pick;t00064;0;here]>[pick;t00600;0;here]>; Slating nails; Spikes; Square barbed nails; Staples; Steel wire--specifications; Trunk cut nails; Underlayment products/applications--specifications; User requirements; Barge and boat spikes; Barrel nails; Basket cut nails; Boat nails; Box nails; Brads; Broom nails; Building materials/applications--specifications; Casing nails; Clout cut nails; Cobblers cut nails; Common nails/spikes; Concrete nails; Cooler nails; Corker nails; Diamond point fasteners; Double-headed nails; Driven fasteners; Escutcheon nails; Extra-iron clinching cut nails; Fasteners (metal)--specifications; Fences/fencing materials--specifications; Fine nails; Finishing process/finishes; Finish nails; Flat top crown staples; Flooring nails; Glued laminated timber (glulam); Gutter spikes; Gypsum wallboard nails; Hob cut nails; Lath nails; Masonry nails; Nails; Pallet nails; Poultry materials/applications--specifications; Roofing nails; Round spikes; Rubber heel nails; Shingle nails; Siding nails; Sinker nails;

ICS Code

ICS Number Code 21.060.01 (Fasteners in general)

DOI: 10.1520/F1667-01

ASTM International is a member of CrossRef.