ASTM E1894-08
Historical Standard: ASTM E1894-08 Standard Guide for Selecting Dosimetry Systems for Application in Pulsed X-Ray Sources
SUPERSEDED (see Active link, below)
ASTM E1894
1. Scope
1.1 This guide provides assistance in selecting and using dosimetry systems in flash X-ray experiments. Both dose and dose-rate techniques are described.
1.2 Operating characteristics of flash x-ray sources are given, with emphasis on the spectrum of the photon output.
1.3 Assistance is provided to relate the measured dose to the response of a device under test (DUT). The device is assumed to be a semiconductor electronic part or system.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
ASTM Standards
E170 Terminology Relating to Radiation Measurements and Dosimetry
E665 Practice for Determining Absorbed Dose Versus Depth in Materials Exposed to the X-Ray Output of Flash X-Ray Machines
E666 Practice for Calculating Absorbed Dose From Gamma or X Radiation
E668 Practice for Application of Thermoluminescence-Dosimetry (TLD) Systems for Determining Absorbed Dose in Radiation-Hardness Testing of Electronic Devices
E1249 Practice for Minimizing Dosimetry Errors in Radiation Hardness Testing of Silicon Electronic Devices Using Co-60 Sources
ISO/ASTM51261 Guide for Selection and Calibration of Dosimetry Systems for Radiation Processing
ISO/ASTM51275 Practice for Use of a Radiochromic Film Dosimetry system
ISO/ASTM51310 Practice for Use of a Radiochromic Optical Waveguide Dosimetry system
Keywords
calorimeter; Compton diode dosimetry; dosimetry; optical waveguide dosimetry; photoconductive detector (PCD); PIN diode dosimetry; pulsed X-ray source; radiochromic dosimetry system; scintillator-photodetector dosimetry; thermoluminescence dosimetry;
ICS Code
ICS Number Code 17.240 (Radiation measurements)
DOI: 10.1520/E1894-08
ASTM International is a member of CrossRef.
