1. Scope

1.1 This terminology standard covers definitions for the following:

1.1.1 Terms that are commonly used in the field of management of lead hazards in facilities;

1.1.2 Architectural terms, particularly those associated with older wood-frame buildings; and,

1.1.3 Specialized terms that may be encountered by users in reports and notices that are generated during lead hazard management activities.

1.2 This terminology standard is supplementary to Terminology E 631.

1.3 Definitions adopted or derived from other documents include the following:

1.3.1 Some of the definitions in this Standard are adopted as exact copies from other sources. The source is briefly identified at the right margin following the definition and fully identified in Section .

1.3.2 Some of the definitions in this terminology standard are adapted from other sources. Changes in these definitions were made only to clarify the meaning, to incorporate related terms that also are defined in this terminology standard, or to ensure that the revised definition is consistent with those for related terms. The source is briefly identified with the words 'adapted' at the right margin following the definition, and is fully identified in Section .

1.4 Terms within the definitions that are shown in boldface are defined in this terminology standard.

1.5 This terminology standard excludes the following:

1.5.1 Terms with a common dictionary meaning, except in cases where there is a specialized definition within the field of lead hazard management.

1.5.2 Terms that are used only in individual ASTM standards in which they are defined adequately, whether formally or by the context in which they appear.

2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.

ASTM Standards

C186 Test Method for Heat of Hydration of Hydraulic Cement

C859 Terminology Relating to Nuclear Materials

D16 Terminology for Paint, Related Coatings, Materials, and Applications

D123 Terminology Relating to Textiles

D661 Test Method for Evaluating Degree of Cracking of Exterior Paints

D772 Test Method for Evaluating Degree of Flaking (Scaling) of Exterior Paints

D907 Terminology of Adhesives

D2864 Terminology Relating to Electrical Insulating Liquids and Gases

D4214 Test Methods for Evaluating the Degree of Chalking of Exterior Paint Films

D4538 Terminology Relating to Protective Coating and Lining Work for Power Generation Facilities

E7 Terminology Relating to Metallography

E131 Terminology Relating to Molecular Spectroscopy

E135 Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials

E344 Terminology Relating to Thermometry and Hydrometry

E456 Terminology Relating to Quality and Statistics

E631 Terminology of Building Constructions

E856 Definitions of Terms and Abbreviations Relating to Physical and Chemical Characteristics of Refuse Derived Fuel

E1187 Terminology Relating to Conformity Assessment

E1227 Terminology for Chemical Analysis of Metals

E1553 Practice for Collection of Airborne Particulate Lead During Abatement and Construction Activities

E1613 Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques

E1644 Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead

E1728 Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination

E1777 Guide for Prioritization of Data Needs for Pavement Management

E1792 Specification for Wipe Sampling Materials for Lead in Surface Dust

E1796 Guide for Selection and Use of Liquid Coating Encapsulation Products for Leaded Paint in Buildings

E1908 Guide for Sample Selection of Debris Waste from a Building Renovation or Lead Abatement Project for Toxicity Characteristic Leaching Procedure (TCLP) Testing for Leachable Lead (Pb)

E1914 Practice for Use of Terms Relating to the Development and Evaluation of Methods for Chemical Analysis

E1979 Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead

E2052 Guide for Evaluation, Management, and Control of Lead Hazards in Facilities

E2239 Practice for Record Keeping and Record Preservation for Lead Hazard Activities

E2255 Practice for Conducting Visual Assessments for Lead Hazards in Buildings

E2271 Practice for Clearance Examinations Following Lead Hazard Reduction Activities in Dwellings, and in Other Child-Occupied Facilities

F141 Terminology Relating to Resilient Floor Coverings

F221 Terminology Relating to Carbon Paper and Inked Ribbon Products and Images Made Therefrom

F1156 Terminology Relating to Product Counterfeit Protection Systems

G40 Terminology Relating to Wear and Erosion

Code of Federal Regulations

ISO Standards

Keywords

lead; lead hazards in facilities; buildings; architectural terms; terminology;

ICS Code

ICS Number Code 13.040.40 (Stationary source emissions)

DOI: 10.1520/E1605-03

ASTM International is a member of CrossRef.