1. Scope

1.1 This practice describes the procedures and equipment used to collect surface and subsurface soil and contaminated media samples for chemical analysis using a hand-operated bucket auger (hereafter referred to as a bucket auger; sometimes referred to as a barrel auger). Several types of bucket augers exist and are designed for sampling various types of soil. All bucket augers collect disturbed samples, but bucket augers can also be used to auger to the desired sampling depth and then, using a core-type sampler, collect a relatively undisturbed sample.

1.2 This practice does not cover the use of large (12-in. or greater diameter) bucket augers mechanically operated by large drill rigs or similar equipment, such as those described in Practice D 1452, section 3.2.4.

1.3 The term bucket auger is used to differentiate this type of hand operated auger from others of the solid or hollow stem types that are also hand held or operated.

1.4 This practice does not address sampling objectives (see Practice D 5792), general sample planning (see Guide D 4687), sampling design (for example, where to collect samples and what depth to sample [see Guide D 6044]), sampling for volatile organic compounds (see Guide D 4547), equipment cleaning and decontamination (see Practice D 5088), sample handling after collection such as compositing and subsampling (see Guide D 6051), and sample preservation. For information on other types of augers, see Practice D 1452 and Guide D 4700.

This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.

ASTM Standards

D1452 Practice for Soil Exploration and Sampling by Auger Borings

D4547 Guide for Sampling Waste and Soils for Volatile Organic Compounds

D4687 Guide for General Planning of Waste Sampling

D4700 Guide for Soil Sampling from the Vadose Zone

D5088 Practice for Decontamination of Field Equipment Used at Waste Sites

D5283 Practice for Generation of Environmental Data Related to Waste Management Activities: Quality Assurance and Quality Control Planning and Implementation

D5434 Guide for Field Logging of Subsurface Explorations of Soil and Rock

D5681 Terminology for Waste and Waste Management

D5792 Practice for Generation of Environmental Data Related to Waste Management Activities: Development of Data Quality Objectives

D6044 Guide for Representative Sampling for Management of Waste and Contaminated Media

D6051 Guide for Composite Sampling and Field Subsampling for Environmental Waste Management Activities

D6232 Guide for Selection of Sampling Equipment for Waste and Contaminated Media Data Collection Activities

D6282 Guide for Direct Push Soil Sampling for Environmental Site Characterizations

D6286 Guide for Selection of Drilling Methods for Environmental Site Characterization

Keywords

auger; barrel auger; bucket auger; environmental; sampling; sampling equipment; soil; soil sampling; waste; waste management; Barrel auger sampler; ;

ICS Code

ICS Number Code 13.080.05 (Examination of soil in general)

DOI: 10.1520/D6907-05E01

ASTM International is a member of CrossRef.