1. Scope

1.1 This guide covers guidelines for the acceptance testing requirements for geosynthetic clay liner (GCL) materials, describing types of tests, test methods, and recommended verifications.

1.2 This guide is intended to aid purchasers, installers, contractors, owners, operators, designers and agencies in establishing a minimum level of effort for product acceptance testing and verification. This is intended to assure that the supplied GCL rolls meet accepted material specifications.

1.3 The values stated in SI units are to be regarded as the standard.

1.4 This guide offers an organized collection of information or a series of options and does not recommend a specific course of action. This guide cannot replace education or experience and should be used in conjunction with professional judgment. Not all aspects of this guide may be applicable in all circumstances. This guide is not intended to represent or replace the standard of care by which the adequacy of a given professional service must be judged, nor should this guide be applied without consideration of a project's many unique aspects. The word 'Standard' in the title of this guide means only that the guide has been approved through the ASTM consensus process.

1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.

ASTM Standards

D792 Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement

D882 Test Method for Tensile Properties of Thin Plastic Sheeting

D1505 Test Method for Density of Plastics by the Density-Gradient Technique

D5199 Test Method for Measuring the Nominal Thickness of Geosynthetics

D5887 Test Method for Measurement of Index Flux Through Saturated Geosynthetic Clay Liner Specimens Using a Flexible Wall Permeameter

D5888 Guide for Storage and Handling of Geosynthetic Clay Liners

D5889 Practice for Quality Control of Geosynthetic Clay Liners

D5890 Test Method for Swell Index of Clay Mineral Component of Geosynthetic Clay Liners

D5891 Test Method for Fluid Loss of Clay Component of Geosynthetic Clay Liners

D5993 Test Method for Measuring Mass Per Unit of Geosynthetic Clay Liners

D5994 Test Method for Measuring Core Thickness of Textured Geomembranes

D6072 Practice for Obtaining Samples of Geosynthetic Clay Liners

D6243 Test Method for Determining the Internal and Interface Shear Resistance of Geosynthetic Clay Liner by the Direct Shear Method

D6496 Test Method for Determining Average Bonding Peel Strength Between Top and Bottom Layers of Needle-Punched Geosynthetic Clay Liners

D6693 Test Method for Determining Tensile Properties of Nonreinforced Polyethylene and Nonreinforced Flexible Polypropylene Geomembranes

D6768 Test Method for Tensile Strength of Geosynthetic Clay Liners

United States EPA Document

Keywords

acceptance; geosynthetics; geosynthetic clay liner; testing; verification; Acceptance criteria/testing--environmental applications; Geosynthetic clay liner (GCL);

ICS Code

ICS Number Code 91.100.50 (Binders. Sealing materials)

DOI: 10.1520/D6495-99

ASTM International is a member of CrossRef.