ASTM D6270-98(2004)
Historical Standard: ASTM D6270-98(2004) Standard Practice for Use of Scrap Tires in Civil Engineering Applications
SUPERSEDED (see Active link, below)
ASTM D6270
1. Scope
1.1 This practice provides guidance for testing the physical properties and gives data for assessment of the leachate generation potential of processed or whole scrap tires in lieu of conventional civil engineering materials, such as stone, gravel, soil, sand, or other fill materials. In addition, typical construction practices are outlined.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
ASTM Standards
C127 Test Method for Density, Relative Density (Specific Gravity), and Absorption of Coarse Aggregate
C136 Test Method for Sieve Analysis of Fine and Coarse Aggregates
D698 Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12 400 ft-lbf/ft3 (600 kN-m/m3))
D1557 Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft3 (2,700 kN-m/m3))
D2434 Test Method for Permeability of Granular Soils (Constant Head)
D2974 Test Methods for Moisture, Ash, and Organic Matter of Peat and Other Organic Soils
D3080 Test Method for Direct Shear Test of Soils Under Consolidated Drained Conditions
D4253 Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table
U.S. Environmental Protection Agency Standard
Method 1311 Toxicity Characteristics Leaching Procedure Test Methods for Evaluating Solid Waste: Physical/Chemical Methods, 3rd ed., Report No. EPA 530/SW-846, U.S. Environmental Protection Agency, Washington, DC.American Association of State Highway and Transportation Officials Standard
M 288 Standard Specification for Geotextiles Standard Specifications for Transportation Materials and Methods of Sampling and Testing, Part I: Specifications, American Association of State Highway and Transportation Officials, Washington, DC.Keywords
construction practices; landfills; leachate; lightweight fill; rail lines; retaining walls; roads; scrap tires; TDA; tire chips; tire derived aggregate; tire shreds; vibration damping;
ICS Code
ICS Number Code 83.160.01 (Tyres in general)
DOI: 10.1520/D6270-98R04
ASTM International is a member of CrossRef.
