ASTM D5843-95(2000)e1
Historical Standard: ASTM D5843-95(2000)e1 Standard Guide for Application of Fully Adhered Vulcanized Rubber Sheets Used in Waterproofing
SUPERSEDED (see Active link, below)
ASTM D5843
1. Scope
1.1 This guide provides information to assist the specifier in developing a specification for the application and protection of fully adhered EPDM (elastomeric terpolymer synthesized from ethylene, propylene, and diene monomer), butyl, and neoprene vulcanized rubber sheets to be installed on concrete substrates.
1.2 The structure and the deck should be evaluated, and found to be mechanically sound, able to accept the weight of the sheet and overburden, and meet the local building code requirements.
1.3 The deck should be sloped to drain with a drainage media or layer above the membrane. The drainage media or layer is not addressed in this guide.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
ASTM Standards
D1079 Terminology Relating to Roofing and Waterproofing
D5295 Guide for Preparation of Concrete Surfaces for Adhered (Bonded) Membrane Waterproofing Systems
D5898 Guide for Details for Adhered Sheet Waterproofing
D5957 Guide for Flood Testing Horizontal Waterproofing Installations
Keywords
application; substrate; vulcanized rubber sheeting; waterproofing;
ICS Code
ICS Number Code 83.140.50 (Seals)
DOI: 10.1520/D5843-95R00E01
ASTM International is a member of CrossRef.
