ASTM C1498-04
Historical Standard: ASTM C1498-04 Standard Test Method for Hygroscopic Sorption Isotherms of Building Materials
SUPERSEDED (see Active link, below)
ASTM C1498
1. Scope
1.1 This test method specifies a laboratory procedure for the determination of hygroscopic sorption isotherms of any construction materials. The method was originally developed for the ASTM Thermal Insulation committee.
1.2 For material characterization, the primary emphasis is on the adsorption isotherm (that is, sorption isotherm that describes the wetting process of the material from the oven-dry condition).
1.3 Determination of desorption isotherm, (that is, sorption isotherm that describes the drying process of a material from the state of absolute saturation with water) is performed when information on drying characteristics of construction materials is required. Typically both adsorption and desorption isotherms are required for the purpose of hygrothermal models.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
ASTM Standards
E104 Practice for Maintaining Constant Relative Humidity by Means of Aqueous Solutions
E337 Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures)
Keywords
hysteresis; moisture content; water vapor sorption; Building materials/applications; Hygroscopic materials/properties/tests; Isotherm techniques ;
ICS Code
ICS Number Code 91.120.30 (Waterproofing)
DOI: 10.1520/C1498-04
ASTM International is a member of CrossRef.
