Abstract

This standard covers dimensionally stable discrete non-asbestos fiber-cement interior substrate sheets suitable for decoration as paint, wallpaper, natural stone, tile, or resilient flooring in internal wet and dry areas. The list of materials for this specification does not include asbestos-cement flat sheets, non-asbestos fiber-cement flat sheets used for claddings, facades, curtain walls, and soffits, gypsum backing boards and coreboards, water-resistant gypsum backing boards, glass mat gypsum backing boards, fiber mat cement boards, or cement-bonded particleboards. The sheets may be coated or uncoated and are classified into four grades according to flexural strength. Materials should essentially consist of an inorganic binder or a calcium silicate binder and optional compatible process aids, fillers, and pigments. To meet property requirements, the products may be formed with or without pressure and cured under natural or accelerated conditions. All products should conform to the required values of flexural strength, density, and modulus of elasticity, and to the qualities of workmanship, finish, and appearance.

This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.

1. Scope

1.1 This specification covers discrete non-asbestos fiber-cement sheets manufactured to be dimensionally stable and suitable for decoration as paint, wallpaper, natural stone, tile, or resilient flooring in internal wet and dry areas.

1.2 This specification is not applicable to asbestos-cement flat sheets (Specification C220 ), non-asbestos fiber cement flat sheets for exterior applications such as claddings, facades, curtain walls, and soffits (Specification C1186 ), gypsum backing board and coreboard (Specification C442/C442M ), water-resistant gypsum backing board (Specification C630/C630M ), glass mat gypsum backing board (Specification C1178/C1178M ), particle boards (Definitions D1554 ), fiber mat cement boards (Specification C1325 and ANSI A118.9), or cement-bonded particleboards (Specification BS 5669: Part 4) and (ISO 8335).

1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.

ASTM Standards

C220 Specification for Flat Asbestos-Cement Sheets

C442/C442M Specification for Gypsum Backing Board, Gypsum Coreboard, and Gypsum Shaftliner Board

C630/C630M Specification for Water-Resistant Gypsum Backing Board

C1154 Terminology for Non-Asbestos Fiber-Reinforced Cement Products

C1178/C1178M Specification for Coated Glass Mat Water-Resistant Gypsum Backing Panel

C1185 Test Methods for Sampling and Testing Non-Asbestos Fiber-Cement Flat Sheet, Roofing and Siding Shingles, and Clapboards

C1186 Specification for Flat Fiber-Cement Sheets

C1325 Specification for Non-Asbestos Fiber-Mat Reinforced Cementitious Backer Units

D1037 Test Methods for Evaluating Properties of Wood-Base Fiber and Particle Panel Materials

D1554 Terminology Relating to Wood-Base Fiber and Particle Panel Materials

E84 Test Method for Surface Burning Characteristics of Building Materials

G21 Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi

ANSI Standards

British Standards

International Standards

Keywords

acceptance; air cured; appearance; autoclaved cured; cellulose fiber; polyvinyl alcohol fiber; density; edge straightness; exterior applications sheet grading; finish; flexural strength; frost resistance; heat/rain resistance; inspection; interior wet area application; length and width tolerance; mechanical properties; minimum equilibrium strength; minimum wet strength; moisture content; moisture movement; nominal length; nominal thickness; nominal width; non-asbestos fiber; packaging; physical properties; polyethylene fiber; polypropylene fiber; coated glass fiber; polyacrylonitrile fiber; surface burning characteristics; pressure cured; sampling; shipping; squareness tolerance; storage; supplementary tests; thickness requirements; thickness tolerance; third party certification; tolerance; type tests; warm water resistance; water tightness; workmanship; Cellulose fiber--specifications; Coated glass fiber; Exterior building applications; Interior wet area application; Mechanical properties; Nonasbestos fiber-cement materials--specifications; Physical properties/dimensions/characteristics; Polyacrylonitrile fiber; Polyethylene (PE) fiber; Polypropylene (PP) fibers; Poly(vinyl alcohol) fiber; Surface burning characteristics;

ICS Code

ICS Number Code 91.100.40 (Products in fibre-reinforced cement)

DOI: 10.1520/C1288-99R10

ASTM International is a member of CrossRef.

ASTM C1288