Content Description

• ASCE/SEI 7 Minimum Design Loads for Buildings and Other Structures, Third Printing / 2010
• ASCE/SEI Standard 24 Flood Resistant Design and Construction / 2005
• SEI/ASCE Standard 32 Design and Construction of Frost-Protected Shallow Foundations / 2001
• ASHRAE Standard 15-2010 Safety Standard for Refrigeration Systems and Standard 34-2010 - Designation and Classification of Refrigerants / 2010
• ASHRAE Standard 62.1-2010 Ventilation for Acceptable Indoor Air Quality / 2010
• ASHRAE Standard 90.1-2007 Energy Standard for Buildings Except Low-Rise Residential Buildings (I-P Edition) (ANSI Approved; IESNA Co-sponsored) / 2007
• ASHRAE Standard 119-1988 (RA 2004) Air Leakage Performance for Detached Single-Family Residential Buildings (ANSI Approved) / 1988
• ASHRAE Standard 140 Standard Method of Test for the Evaluation of Building Energy Analysis Computer Programs (ANSI Approved) / 2007
• ASME A17.1/CSA B44 Safety Code for Elevators and Escalators / 2007
• ASME A112.1.2 Air Gaps in Plumbing Systems (For Plumbing Fixtures and Water-Connected Receptors) / 2004
• ASME A112.1.3 Air Gap Fittings for Use with Plumbing Fixtures, Appliances and Appurtenances / 2000
• ASME A112.3.4 Macerating Toilet Systems and Related Components / 2000
• ASME A112.4.1 Water Heater Relief Valve Drain Tubes / 1993
• ASME A112.4.2 Water Closet Personal Hygiene Devices / 2009
• ASME A112.4.3 Plastic Fittings for Connecting Water Closets to the Sanitary Drainage System / 1999
• ASME A112.6.3 Floor And Trench Drains / 2001
• ASME A112.14.1 Backwater Valves / 2003
• ASME A112.14.3 Grease Interceptors / 2000
• ASME A112.14.4 Grease Removal Devices / 2001
• ASME A112.18.1 Plumbing Supply Fittings / 2005
• ASME A112.18.2 Plumbing Waste Fittings / 2005
• ASME A112.18.3 Performance Requirements for Backflow Protection Devices and Systems in Plumbing Fixture Fittings / 2002
• ASME A112.18.6 Flexible Water Connectors / 2009
• ASME A112.18.7 Deck mounted Bath/Shower Transfer Valves with Integral Backflow Protection / 1999
• ASME A112.19.1 Enameled Cast Iron Plumbing Fixtures / 1994
• ASME A112.19.2 Ceramic Plumbing Fixtures / 2008
• A112.19.3/CSA B45.4 Stainless Steel Plumbing Fixtures / 2008
• ASME A112.19.4M Porcelain Enameled Formed Steel Plumbing Fixtures / 1994
• ASME A112.19.5 Trim for Water-Closet Bowls, Tanks and Urinals / 2005
• ASME A112.19.7 Hydromassage Bathtub Appliances / 2006
• ASME A112.19.15 Bathtub/Whirlpool Bathtubs with Pressure Sealed Doors / 2005
• ASME A112.19.19 Vitreous China Nonwater Urinals / 2006
• ASME A112.21.2M Roof Drains / 1983
• ASME A112.36.2M Cleanouts / 1991
• ASME B16.12 Cast Iron Threaded Drainage Fittings / 1998
• ASME B16.18 Cast Copper Alloy Solder Joint Pressure Fittings / 2001
• ASME B16.22 Wrought Copper And Copper Alloy Solder Joint Pressure Fittings / 2001
• ASME B16.26 Standard for Cast Copper Alloy Fittings for Flared Copper Tubes / 2006
• ASME B31.1 Power Piping / 2010
• ASME B31.3 Process Piping / 2010
• ASME B36.10M Welded and Seamless Wrought Steel Pipe / 2004
• ASME CSD 1 Control and Safety Devices for Automatically Fired Boilers / 2009
• A74-09: A74-09 Standard Specification for Cast Iron Soil Pipe and Fittings / 2009
• A888-09: A888-09 Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications / 2009
• B32-08: B32-08 Standard Specification for Solder Metal / 2008
• B42-02: B42-02 Standard Specification for Seamless Copper Pipe, Standard Sizes / 2002
• B42-02e1: B42-02e1 Standard Specification for Seamless Copper Pipe, Standard Sizes / 2002
• B75-02: B75-02 Standard Specification for Seamless Copper Tube / 2002
• B88-03: B88-03 Standard Specification for Seamless Copper Water Tube / 2003
• B251-02: B251-02 Standard Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube / 2002
• B251-02e1: B251-02e1 Standard Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube / 2002
• B687-99(2005)e1: B687-99(2005)e1 Standard Specification for Brass, Copper, and Chromium-Plated Pipe Nipples / 2005
• B813-00: B813-00 Standard Specification for Liquid and Paste Fluxes for Soldering of Copper and Copper Alloy Tube / 2000
• B813-00(2009): B813-00(2009) Standard Specification for Liquid and Paste Fluxes for Soldering of Copper and Copper Alloy Tube / 2009
• B828-02: B828-02 Standard Practice for Making Capillary Joints by Soldering of Copper and Copper Alloy Tube and Fittings / 2002
• C14-07: C14-07 Standard Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe / 2007
• C28/C28M-00(2005): C28/C28M-00(2005) Standard Specification for Gypsum Plasters / 2005
• C33-03: C33-03 Standard Specification for Concrete Aggregates / 2003
• C36/C36M-03 Standard Specification for Gypsum Wallboard / 2003
• C37/C37M-01 Standard Specification for Gypsum Lath / 2001
• C55-06: C55-06 Standard Specification for Concrete Building Brick / 2006
• C59/C59M-00: C59/C59M-00 Standard Specification for Gypsum Casting Plaster and Gypsum Molding Plaster / 2000
• C62-08: C62-08 Standard Specification for Building Brick (Solid Masonry Units Made From Clay or Shale) / 2008
• C73-05: C73-05 Standard Specification for Calcium Silicate Brick (Sand-Lime Brick) / 2005
• C90-05: C90-05 Standard Specification for Loadbearing Concrete Masonry Units / 2005
• C90-06b: C90-06b Standard Specification for Loadbearing Concrete Masonry Units / 2006
• C90-08: C90-08 Standard Specification for Loadbearing Concrete Masonry Units / 2008
• C91-05: C91-05 Standard Specification for Masonry Cement / 2005
• C94/C94M-09: C94/C94M-09 Standard Specification for Ready-Mixed Concrete / 2009
• C129-06: C129-06 Standard Specification for Nonloadbearing Concrete Masonry Units / 2006
• C143/C143M-08: C143/C143M-08 Standard Test Method for Slump of Hydraulic-Cement Concrete / 2008
• C296-00(2004)e1: C296-00(2004)e1 Standard Specification for Asbestos-Cement Pressure Pipe / 2004
• C475/C475M-02(2007): C475/C475M-02(2007) Standard Specification for Joint Compound and Joint Tape for Finishing Gypsum Board / 2007
• C476-08: C476-08 Standard Specification for Grout for Masonry / 2008
• C564-08: C564-08 Standard Specification for Rubber Gaskets for Cast Iron Soil Pipe and Fittings / 2008
• C630/C630M-03 Standard Specification for Water-Resistant Gypsum Backing Board / 2003
• C1261-07: C1261-07 Standard Specification for Firebox Brick for Residential Fireplaces / 2007
• C1277-08: C1277-08 Standard Specification for Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings / 2008
• C1283-07a: C1283-07a Standard Practice for Installing Clay Flue Lining / 2007
• C1395/C1395M-04 Specification for Gypsum Ceiling Board / 2004
• C1396/C1396M-06a: C1396/C1396M-06a Standard Specification for Gypsum Board / 2006
• C1461-08: C1461-08 Standard Specification for Mechanical Couplings Using Thermoplastic Elastomeric (TPE) Gaskets for Joining Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems for Above and Below Ground Use / 2008
• C1540-08: C1540-08 Standard Specification for Heavy Duty Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings / 2008
• D1785-06: D1785-06 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120 / 2006
• D1970-01: D1970-01 Standard Specification for Self-Adhering Polymer Modified Bituminous Sheet Materials Used as Steep Roofing Underlayment for Ice Dam Protection / 2001
• D2235-04: D2235-04 Standard Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings / 2004
• D2239-03: D2239-03 Standard Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter / 2003
• D2241-05: D2241-05 Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series) / 2005
• D2466-06: D2466-06 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40 / 2006
• D2467-06: D2467-06 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80 / 2006
• D2564-04e1: D2564-04e1 Standard Specification for Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems / 2004
• D2609-02: D2609-02 Standard Specification for Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe / 2002
• D2657-07: D2657-07 Standard Practice for Heat Fusion Joining of Polyolefin Pipe and Fittings / 2007
• D2661-06: D2661-06 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings / 2006
• D2665-07: D2665-07 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings / 2007
• D2665-09: D2665-09 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings / 2009
• D2672-96a(2003): D2672-96a(2003) Standard Specification for Joints for IPS PVC Pipe Using Solvent Cement / 2003
• D2729-03: D2729-03 Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings / 2003
• D2729-11: D2729-11 Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings / 2011
• D2737-03: D2737-03 Standard Specification for Polyethylene (PE) Plastic Tubing / 2003
• D2751-05: D2751-05 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Sewer Pipe and Fittings / 2005
• D2846/D2846M-09: D2846/D2846M-09 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems / 2009
• D2846/D2846M-09be1: D2846/D2846M-09be1 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems / 2009
• D2855-96: D2855-96 Standard Practice for Making Solvent-Cemented Joints with Poly(Vinyl Chloride) (PVC) Pipe and Fittings / 1996
• D2855-96(2002): D2855-96(2002) Standard Practice for Making Solvent-Cemented Joints with Poly(Vinyl Chloride) (PVC) Pipe and Fittings / 2002
• D2949-01: D2949-01 Standard Specification for 3.25-in. Outside Diameter Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings / 2001
• D2949-01a(2008): D2949-01a(2008) Standard Specification for 3.25-in. Outside Diameter Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings / 2008
• D3311-08: D3311-08 Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns / 2008
• D3462-09: D3462-09 Standard Specification for Asphalt Shingles Made from Glass Felt and Surfaced with Mineral Granules / 2009
• D3679-09: D3679-09 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding / 2009
• D3957-06: D3957-06 Standard Practices for Establishing Stress Grades for Structural Members Used in Log Buildings / 2006
• D4869-05: D4869-05 Standard Specification for Asphalt-Saturated Organic Felt Underlayment Used in Steep Slope Roofing / 2005
• D6380-03: D6380-03 Standard Specification for Asphalt Roll Roofing (Organic Felt) / 2003
• D7032-08: D7032-08 Standard Specification for Establishing Performance Ratings for Wood-Plastic Composite Deck Boards and Guardrail Systems (Guards or Handrails) / 2008
• E84-09: E84-09 Standard Test Method for Surface Burning Characteristics of Building Materials / 2009
• E90-04: E90-04 Standard Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements / 2004
• E283-04: E283-04 Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen / 2004
• E814-08b: E814-08b Standard Test Method for Fire Tests of Penetration Firestop Systems / 2008
• F405-05: F405-05 Standard Specification for Corrugated Polyethylene (PE) Pipe and Fittings / 2005
• F409-02(2008): F409-02(2008) Standard Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings / 2008
• F437-06: F437-06 Standard Specification for Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80 / 2006
• F438-04: F438-04 Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40 / 2004
• F441/F441M-02(2008): F441/F441M-02(2008) Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80 / 2008
• F493-04: F493-04 Standard Specification for Solvent Cements for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe and Fittings / 2004
• F628-08: F628-08 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core / 2008
• F656-08: F656-08 Standard Specification for Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride) (PVC) Plastic Pipe and Fittings / 2008
• F876-08b: F876-08b Standard Specification for Crosslinked Polyethylene (PEX) Tubing / 2008
• F877-07: F877-07 Standard Specification for Crosslinked Polyethylene (PEX) Plastic Hot- and Cold-Water Distribution Systems / 2007
• F1281-07: F1281-07 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe / 2007
• F1282-06: F1282-06 Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe / 2006
• F1346-91(2003): F1346-91(2003) Standard Performance Specification for Safety Covers and Labeling Requirements for All Covers for Swimming Pools, Spas and Hot Tubs / 2003
• F1554-07a: F1554-07a Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength / 2007
• F1667-05: F1667-05 Standard Specification for Driven Fasteners: Nails, Spikes, and Staples / 2005
• F1807-08: F1807-08 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing / 2008
• F1866-07: F1866-07 Standard Specification for Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and DWV Fabricated Fittings / 2007
• F1960-09: F1960-09 Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing / 2009
• F1974-08: F1974-08 Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe / 2008
• F1986-01(2006): F1986-01(2006) Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hot and Cold Drinking-Water Systems / 2006
• F2080-08: F2080-08 Standard Specification for Cold-Expansion Fittings With Metal Compression-Sleeves for Cross-Linked Polyethylene (PEX) Pipe / 2008
• F2090-08: F2090-08 Standard Specification for Window Fall Prevention Devices With Emergency Escape (Egress) Release Mechanisms / 2008
• F2098-08: F2098-08 Standard Specification for Stainless Steel Clamps for Securing SDR9 Cross-linked Polyethylene (PEX) Tubing to Metal Insert and Plastic Insert Fittings / 2008
• F2159-05: F2159-05 Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing / 2005
• F2262-05: F2262-05 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Tubing OD Controlled SDR9 / 2005
• F2434-08: F2434-08 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Cross-linked Polyethylene/Aluminum/Cross-linked Polyethylene (PEX-AL-PEX) Tubing / 2008
• AWWA C510-07: Double Check Valve Backflow Prevention Assembly / 2007
• AWWA C511-07: Reduced Pressure Principle Backflow Prevention Assembly / 2007
• FEMA-TB-2-2008: FEMA TB2 Flood Damage-Resistant Materials Requirements / 2008
• FEMA TB11 - Crawlspace Construction for Buildings Located in Special Flood Hazard Areas (FIA-TB-11) / 2001
• ICC 300-2012: Bleachers, Folding and Telescopic Seating, and Grandstands / 2012
• ICC 400-2012: Standard on the Design and Construction of Log Structures / 2012
• ICC 500:Standard for the Design and Construction of Storm Shelters / 2008
• ICC/ANSI A117.1 / 2003
• ICC A117.1 Accessible and Usable Buildings and Facilities / 2009
• International Fire Code / 2012
• International Fuel Gas Code / 2012
• International Property Maintenance Code / 2012
• International Private Sewage Disposal Code / 2012
• Michigan Building Code / 2009
• Michigan Uniform Energy Code / 2009
• Michigan Mechanical Code / 2012
• Michigan Plumbing Code / 2012
• Michigan Rehabilitation of Existing Building Code / 2009
• Michigan Residential Code / 2009
• NFPA 10: Standard for Portable Fire Extinguishers / 2010
• NFPA 11: Standard for Low-, Medium-, and High-Expansion Foam / 2010
• NFPA 12: Standard on Carbon Dioxide Extinguishing Systems / 2011
• NFPA 12A: Standard on Halon 1301 Fire Extinguishing Systems / 2009
• NFPA 13: Standard for the Installation of Sprinkler Systems / 2010
• NFPA 13D: Standard for the Installation of Sprinkler Systems in One- and Two-Family Dwellings and Manufactured Homes / 2010
• NFPA 13R: Standard for the Installation of Sprinkler Systems in Residential Occupancies up to and Including Four Stories in Height / 2007
• NFPA 13R: Standard for the Installation of Sprinkler Systems in Residential Occupancies up to and Including Four Stories in Height / 2010
• NFPA 14: Standard for the Installation of Standpipe and Hose Systems / 2010
• NFPA 16: Standard for the Installation of Foam-Water Sprinkler and Foam-Water Spray Systems / 2011
• NFPA 17: Standard for Dry Chemical Extinguishing Systems / 2009
• NFPA 17A: Standard for Wet Chemical Extinguishing Systems / 2009
• NFPA 20: Standard for the Installation of Stationary Pumps for Fire Protection / 2010
• NFPA 30: Flammable and Combustible Liquids Code / 2012
• NFPA 31: Standard for the Installation of Oil-Burning Equipment / 2006
• NFPA 31: Standard for the Installation of Oil-Burning Equipment / 2011
• NFPA 32: Standard for Drycleaning Plants / 2011
• NFPA 40: Standard for the Storage and Handling of Cellulose Nitrate Film / 2011
• NFPA 50: Standard for Bulk Oxygen Systems at Consumer Sites / 2001
• NFPA 51: Standard for the Design and Installation of Oxygen-Fuel Gas Systems for Welding, Cutting, and Allied Processes / 2007
• NFPA 58: Liquefied Petroleum Gas Code / 2011
• NFPA 61: Standard for the Prevention of Fires and Dust Explosions in Agricultural and Food Processing Facilities / 2008
• NFPA 70: National Electrical Code / 2011
• NFPA 72: National Fire Alarm and Signaling Code / 2010
• NFPA 80: Standard for Fire Doors and Other Opening Protectives / 2010
• NFPA 85: Boiler and Combustion Systems Hazards Code / 2011
• NFPA 92B: Standard for Smoke Management Systems in Malls, Atria, and Large Areas / 2009
• NFPA 96: Standard for Ventilation Control and Fire Protection of Commercial Cooking Operations / 2008
• NFPA 99: Health Care Facilities Code / 2012
• NFPA 101: Life Safety Code / 2012
• NFPA 105: Standard for Smoke Door Assemblies and Other Opening Protectives / 2010
• NFPA 110: Standard for Emergency and Standby Power Systems / 2010
• NFPA 111: Standard on Stored Electrical Energy Emergency and Standby Power Systems / 2010
• NFPA 120: Standard for Fire Prevention and Control in Coal Mines / 2010
• NFPA 170: Standard for Fire Safety Symbols / 2009
• NFPA 211: Standard for Chimneys, Fireplaces, Vents, and Solid Fuel-Burning Appliances / 2010
• NFPA 221: Standard for Fire Walls and Fire Barrier Walls / 2009
• NFPA 252: Standard Methods of Fire Tests of Door Assemblies / 2012
• NFPA 253: Standard Method of Test for Critical Radiant Flux of Floor Covering Systems Using a Radiant Heat Energy Source / 2011
• NFPA 257: Standard on Fire Test for Window and Glass Block Assemblies / 2012
• NFPA 259: Standard Test Method for Potential Heat of Building Materials / 2008
• NFPA 265: Standard Methods of Fire Tests for Evaluating Room Fire Growth Contribution of Textile or Expanded Vinyl Wall Coverings on Full Height Panels and Walls / 2011
• NFPA 268: Standard Test Method for Determining Ignitibility of Exterior Wall Assemblies Using a Radiant Heat Energy Source / 2012
• NFPA 275: Standard Method of Fire Tests for the Evaluation of Thermal Barriers Used Over Foam Plastic Insulation / 2009
• NFPA 285: Standard Fire Test Method for Evaluation of Fire Propagation Characteristics of Exterior Non-Load-Bearing Wall Assemblies Containing Combustible Components / 2012
• NFPA 286: Standard Methods of Fire Tests for Evaluating Contribution of Wall and Ceiling Interior Finish to Room Fire Growth / 2011
• NFPA 288: Standard Methods of Fire Tests of Horizontal Fire Door Assemblies Installed in Horizontal Fire Resistance-Rated Assemblies / 2012
• NFPA 289: Standard Method of Fire Test for Individual Fuel Packages / 2009
• NFPA 409: Standard on Aircraft Hangars / 2011
• NFPA 418: Standard for Heliports / 2011
• NFPA 484: Standard for Combustible Metals / 2012
• NFPA 654: Standard for the Prevention of Fire and Dust Explosions from the Manufacturing, Processing, and Handling of Combustible Particulate Solids / 2013
• NFPA 655: Standard for Prevention of Sulfur Fires and Explosions / 2012
• NFPA 664: Standard for the Prevention of Fires and Explosions in Wood Processing and Woodworking Facilities / 2012
• NFPA 701: Standard Methods of Fire Tests for Flame Propagation of Textiles and Films / 2010
• NFPA 704: Standard System for the Identification of the Hazards of Materials for Emergency Response / 2012
• NFPA 720: Standard for the Installation of Household Carbon Monoxide (CO) Warning Equipment / 2009
• NFPA 1124: Code for the Manufacturing, Transportation, Storage and Retail Sale of Fireworks and Pyrotechnic Articles / 2006
• NFPA 2001: Clean Agent Fire Extinguishing Systems / 2008
• Fibrous Glass Duct Construction Standards, 7th Edition / 2003
• HVAC Duct Construction Standards - Metal and Flexible, 3rd Edition / 2005

About COMBO

Combination Packages consist of subscriptions from multiple publishers.