|
-
COMBO
Michigan State Essential Referenced Standards - Commercial
Edition: VAR
$13,623.41
/ user per year
Content Description
Michigan State Essential Referenced Standards - Commercial Package includes:
- ASCE/SEI 7 Minimum Design Loads for Buildings and Other Structures, Third Printing / 2010
- ASCE/SEI Standard 24 Flood Resistant Design and Construction / 2005
- ASHRAE Standard 15-2010 Safety Standard for Refrigeration Systems and Standard 34-2010 - Designation and Classification of Refrigerants / 2010
- ASHRAE Standard 62.1-2010 Ventilation for Acceptable Indoor Air Quality / 2010
- ASHRAE Standard 90.1-2007 Energy Standard for Buildings Except Low-Rise Residential Buildings (I-P Edition) (ANSI Approved; IESNA Co-sponsored) / 2007
- ASHRAE Standard 119-1988 (RA 2004) Air Leakage Performance for Detached Single-Family Residential Buildings (ANSI Approved) / 1988
- ASHRAE Standard 140 Standard Method of Test for the Evaluation of Building Energy Analysis Computer Programs (ANSI Approved) / 2007
- ASME A17.1/CSA B44 Safety Code for Elevators and Escalators / 2007
- ASME A112.1.3 Air Gap Fittings for Use with Plumbing Fixtures, Appliances and Appurtenances / 2000
- ASME A112.4.1 Water Heater Relief Valve Drain Tubes / 1993
- ASME A112.4.3 Plastic Fittings for Connecting Water Closets to the Sanitary Drainage System / 1999
- ASME A112.14.1 Backwater Valves / 2003
- ASME A112.14.3 Grease Interceptors / 2000
- ASME A112.14.4 Grease Removal Devices / 2001
- ASME A112.18.1 Plumbing Supply Fittings / 2005
- ASME A112.18.2 Plumbing Waste Fittings / 2005
- ASME A112.18.3 Performance Requirements for Backflow Protection Devices and Systems in Plumbing Fixture Fittings / 2002
- ASME A112.18.6 Flexible Water Connectors / 2009
- ASME A112.18.7 Deck mounted Bath/Shower Transfer Valves with Integral Backflow Protection / 1999
- ASME A112.19.1 Enameled Cast Iron Plumbing Fixtures / 1994
- ASME A112.19.2 Ceramic Plumbing Fixtures / 2008
- ASME A112.19.4M Porcelain Enameled Formed Steel Plumbing Fixtures / 1994
- ASME A112.19.5 Trim for Water-Closet Bowls, Tanks and Urinals / 2005
- ASME A112.19.7 Hydromassage Bathtub Appliances / 2006
- ASME A112.19.19 Vitreous China Nonwater Urinals / 2006
- ASME A112.21.2M Roof Drains / 1983
- ASME A112.36.2M Cleanouts / 1991
- ASME B16.12 Cast Iron Threaded Drainage Fittings / 1998
- ASME B16.18 Cast Copper Alloy Solder Joint Pressure Fittings / 2001
- ASME B16.22 Wrought Copper And Copper Alloy Solder Joint Pressure Fittings / 2001
- ASME B16.26 Standard for Cast Copper Alloy Fittings for Flared Copper Tubes / 2006
- ASME B31.1 Power Piping / 2010
- ASME B31.3 Process Piping / 2010
- ASME B36.10M Welded and Seamless Wrought Steel Pipe / 2004
- ASME CSD 1 Control and Safety Devices for Automatically Fired Boilers / 2009
- A74-09: A74-09 Standard Specification for Cast Iron Soil Pipe and Fittings / 2009
- A888-09: A888-09 Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications / 2009
- B32-08: B32-08 Standard Specification for Solder Metal / 2008
- B42-02e1: B42-02e1 Standard Specification for Seamless Copper Pipe, Standard Sizes / 2002
- B75-02: B75-02 Standard Specification for Seamless Copper Tube / 2002
- B88-03: B88-03 Standard Specification for Seamless Copper Water Tube / 2003
- B251-02e1: B251-02e1 Standard Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube / 2002
- B687-99(2005)e1: B687-99(2005)e1 Standard Specification for Brass, Copper, and Chromium-Plated Pipe Nipples / 2005
- B813-00(2009): B813-00(2009) Standard Specification for Liquid and Paste Fluxes for Soldering of Copper and Copper Alloy Tube / 2009
- C14-07: C14-07 Standard Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe / 2007
- C90-06b: C90-06b Standard Specification for Loadbearing Concrete Masonry Units / 2006
- C296-00(2004)e1: C296-00(2004)e1 Standard Specification for Asbestos-Cement Pressure Pipe / 2004
- C564-08: C564-08 Standard Specification for Rubber Gaskets for Cast Iron Soil Pipe and Fittings / 2008
- C1277-08: C1277-08 Standard Specification for Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings / 2008
- C1461-08: C1461-08 Standard Specification for Mechanical Couplings Using Thermoplastic Elastomeric (TPE) Gaskets for Joining Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems for Above and Below Ground Use / 2008
- C1540-08: C1540-08 Standard Specification for Heavy Duty Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings / 2008
- D1785-06: D1785-06 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120 / 2006
- D2239-03: D2239-03 Standard Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter / 2003
- D2241-05: D2241-05 Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series) / 2005
- D2466-06: D2466-06 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40 / 2006
- D2467-06: D2467-06 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80 / 2006
- D2564-04e1: D2564-04e1 Standard Specification for Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems / 2004
- D2665-09: D2665-09 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings / 2009
- D2672-96a(2003): D2672-96a(2003) Standard Specification for Joints for IPS PVC Pipe Using Solvent Cement / 2003
- D2729-03: D2729-03 Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings / 2003
- D2846/D2846M-09: D2846/D2846M-09 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems / 2009
- D2855-96(2002): D2855-96(2002) Standard Practice for Making Solvent-Cemented Joints with Poly(Vinyl Chloride) (PVC) Pipe and Fittings / 2002
- D2949-01a(2008): D2949-01a(2008) Standard Specification for 3.25-in. Outside Diameter Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings / 2008
- D3311-08: D3311-08 Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns / 2008
- E283-04: E283-04 Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen / 2004
- F405-05: F405-05 Standard Specification for Corrugated Polyethylene (PE) Pipe and Fittings / 2005
- F409-02(2008): F409-02(2008) Standard Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings / 2008
- F438-04: F438-04 Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40 / 2004
- F441/F441M-02(2008): F441/F441M-02(2008) Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80 / 2008
- F493-04: F493-04 Standard Specification for Solvent Cements for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe and Fittings / 2004
- F656-08: F656-08 Standard Specification for Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride) (PVC) Plastic Pipe and Fittings / 2008
- F876-08b: F876-08b Standard Specification for Crosslinked Polyethylene (PEX) Tubing / 2008
- F877-07: F877-07 Standard Specification for Crosslinked Polyethylene (PEX) Plastic Hot- and Cold-Water Distribution Systems / 2007
- F1281-07: F1281-07 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe / 2007
- F1282-06: F1282-06 Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe / 2006
- F1807-08: F1807-08 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing / 2008
- F1866-07: F1866-07 Standard Specification for Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and DWV Fabricated Fittings / 2007
- F1960-09: F1960-09 Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing / 2009
- F1974-08: F1974-08 Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe / 2008
- F1986-01(2006): F1986-01(2006) Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hot and Cold Drinking-Water Systems / 2006
- F2080-08: F2080-08 Standard Specification for Cold-Expansion Fittings With Metal Compression-Sleeves for Cross-Linked Polyethylene (PEX) Pipe / 2008
- F2098-08: F2098-08 Standard Specification for Stainless Steel Clamps for Securing SDR9 Cross-linked Polyethylene (PEX) Tubing to Metal Insert and Plastic Insert Fittings / 2008
- F2159-05: F2159-05 Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing / 2005
- F2262-05: F2262-05 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Tubing OD Controlled SDR9 / 2005
- F2434-08: F2434-08 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Cross-linked Polyethylene/Aluminum/Cross-linked Polyethylene (PEX-AL-PEX) Tubing / 2008
- AWWA C510-07: Double Check Valve Backflow Prevention Assembly / 2007
- AWWA C511-07: Reduced Pressure Principle Backflow Prevention Assembly / 2007
- ICC 300-2012: Bleachers, Folding and Telescopic Seating, and Grandstands / 2012
- ICC 400-2012: Standard on the Design and Construction of Log Structures / 2012
- ICC 500:Standard for the Design and Construction of Storm Shelters / 2008
- ICC/ANSI A117.1 / 2003
- International Fire Code / 2012
- International Fuel Gas Code / 2012
- International Property Maintenance Code / 2012
- International Private Sewage Disposal Code / 2012
- Michigan Building Code / 2009
- Michigan Uniform Energy Code / 2009
- Michigan Mechanical Code / 2012
- Michigan Plumbing Code / 2012
- Michigan Rehabilitation of Existing Building Code / 2009
- Michigan Residential Code / 2009
- NFPA 10: Standard for Portable Fire Extinguishers / 2010
- NFPA 11: Standard for Low-, Medium-, and High-Expansion Foam / 2010
- NFPA 12: Standard on Carbon Dioxide Extinguishing Systems / 2011
- NFPA 12A: Standard on Halon 1301 Fire Extinguishing Systems / 2009
- NFPA 13: Standard for the Installation of Sprinkler Systems / 2010
- NFPA 13D: Standard for the Installation of Sprinkler Systems in One- and Two-Family Dwellings and Manufactured Homes / 2010
- NFPA 13R: Standard for the Installation of Sprinkler Systems in Residential Occupancies up to and Including Four Stories in Height / 2007
- NFPA 13R: Standard for the Installation of Sprinkler Systems in Residential Occupancies up to and Including Four Stories in Height / 2010
- NFPA 14: Standard for the Installation of Standpipe and Hose Systems / 2010
- NFPA 16: Standard for the Installation of Foam-Water Sprinkler and Foam-Water Spray Systems / 2011
- NFPA 17: Standard for Dry Chemical Extinguishing Systems / 2009
- NFPA 17A: Standard for Wet Chemical Extinguishing Systems / 2009
- NFPA 20: Standard for the Installation of Stationary Pumps for Fire Protection / 2010
- NFPA 30: Flammable and Combustible Liquids Code / 2012
- NFPA 31: Standard for the Installation of Oil-Burning Equipment / 2006
- NFPA 31: Standard for the Installation of Oil-Burning Equipment / 2011
- NFPA 32: Standard for Drycleaning Plants / 2011
- NFPA 40: Standard for the Storage and Handling of Cellulose Nitrate Film / 2011
- NFPA 50: Standard for Bulk Oxygen Systems at Consumer Sites / 2001
- NFPA 51: Standard for the Design and Installation of Oxygen-Fuel Gas Systems for Welding, Cutting, and Allied Processes / 2007
- NFPA 58: Liquefied Petroleum Gas Code / 2011
- NFPA 61: Standard for the Prevention of Fires and Dust Explosions in Agricultural and Food Processing Facilities / 2008
- NFPA 70: National Electrical Code / 2011
- NFPA 72: National Fire Alarm and Signaling Code / 2010
- NFPA 80: Standard for Fire Doors and Other Opening Protectives / 2010
- NFPA 85: Boiler and Combustion Systems Hazards Code / 2011
- NFPA 92B: Standard for Smoke Management Systems in Malls, Atria, and Large Areas / 2009
- NFPA 96: Standard for Ventilation Control and Fire Protection of Commercial Cooking Operations / 2008
- NFPA 99: Health Care Facilities Code / 2012
- NFPA 101: Life Safety Code / 2012
- NFPA 105: Standard for Smoke Door Assemblies and Other Opening Protectives / 2010
- NFPA 110: Standard for Emergency and Standby Power Systems / 2010
- NFPA 111: Standard on Stored Electrical Energy Emergency and Standby Power Systems / 2010
- NFPA 120: Standard for Fire Prevention and Control in Coal Mines / 2010
- NFPA 170: Standard for Fire Safety Symbols / 2009
- NFPA 211: Standard for Chimneys, Fireplaces, Vents, and Solid Fuel-Burning Appliances / 2010
- NFPA 221: Standard for Fire Walls and Fire Barrier Walls / 2009
- NFPA 252: Standard Methods of Fire Tests of Door Assemblies / 2012
- NFPA 253: Standard Method of Test for Critical Radiant Flux of Floor Covering Systems Using a Radiant Heat Energy Source / 2011
- NFPA 257: Standard on Fire Test for Window and Glass Block Assemblies / 2012
- NFPA 259: Standard Test Method for Potential Heat of Building Materials / 2008
- NFPA 265: Standard Methods of Fire Tests for Evaluating Room Fire Growth Contribution of Textile or Expanded Vinyl Wall Coverings on Full Height Panels and Walls / 2011
- NFPA 268: Standard Test Method for Determining Ignitibility of Exterior Wall Assemblies Using a Radiant Heat Energy Source / 2012
- NFPA 275: Standard Method of Fire Tests for the Evaluation of Thermal Barriers Used Over Foam Plastic Insulation / 2009
- NFPA 285: Standard Fire Test Method for Evaluation of Fire Propagation Characteristics of Exterior Non-Load-Bearing Wall Assemblies Containing Combustible Components / 2012
- NFPA 286: Standard Methods of Fire Tests for Evaluating Contribution of Wall and Ceiling Interior Finish to Room Fire Growth / 2011
- NFPA 288: Standard Methods of Fire Tests of Horizontal Fire Door Assemblies Installed in Horizontal Fire Resistance-Rated Assemblies / 2012
- NFPA 289: Standard Method of Fire Test for Individual Fuel Packages / 2009
- NFPA 409: Standard on Aircraft Hangars / 2011
- NFPA 418: Standard for Heliports / 2011
- NFPA 484: Standard for Combustible Metals / 2012
- NFPA 654: Standard for the Prevention of Fire and Dust Explosions from the Manufacturing, Processing, and Handling of Combustible Particulate Solids / 2013
- NFPA 655: Standard for Prevention of Sulfur Fires and Explosions / 2012
- NFPA 664: Standard for the Prevention of Fires and Explosions in Wood Processing and Woodworking Facilities / 2012
- NFPA 701: Standard Methods of Fire Tests for Flame Propagation of Textiles and Films / 2010
- NFPA 704: Standard System for the Identification of the Hazards of Materials for Emergency Response / 2012
- NFPA 720: Standard for the Installation of Household Carbon Monoxide (CO) Warning Equipment / 2009
- NFPA 1124: Code for the Manufacturing, Transportation, Storage and Retail Sale of Fireworks and Pyrotechnic Articles / 2006
- NFPA 2001: Clean Agent Fire Extinguishing Systems / 2008
- Fibrous Glass Duct Construction Standards, 7th Edition / 2003
- HVAC Duct Construction Standards - Metal and Flexible, 3rd Edition / 2005
About COMBO
Combination Packages consist of subscriptions from multiple publishers.
|
US LOCAL CODES
US Territory Code Adoptions / Amendments
US State Code Adoptions / Amendments
|