eLibrary >
BS ISO 606:2015 Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets >
Expand All
TOC Search:
BS ISO 606:2015 Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets, 2015
- Foreword
- Introduction
- 1 Scope
- 2 Normative references
- 3 Chains
- 3.1 Nomenclature of assemblies and components
- 3.2 Designation
- 3.3 Dimensions
- 3.4 Performance requirements
- 3.4.1 General
- 3.4.2 Tensile testing
- 3.4.3 Preloading
- 3.4.4 Length validation
- 3.4.5 Dynamic testing
- 3.5 Marking
- 3.6 Cranked links
- 4 Attachments
- 4.1 Nomenclature
- 4.2 General
- 4.3 Designation
- 4.4 Dimensions
- 4.5 Manufacture
- 4.6 Marking
- 5 Chain sprockets
- 5.1 General
- 5.2 Nomenclature
- 5.3 Diametral dimensions of sprocket rim
- 5.3.1 Nomenclature
- 5.3.2 Dimensions
- 5.4 Sprocket tooth gap forms
- 5.4.1 Nomenclature
- 5.4.2 Dimensions
- 5.5 Tooth heights and tip diameters
- 5.5.1 Nomenclature
- 5.5.2 Dimensions
- 5.6 Sprocket rim profiles
- 5.6.1 Nomenclature
- 5.6.2 Dimensions
- 5.7 Radial run-out
- 5.8 Axial run-out (wobble)
- 5.9 Pitch accuracy of sprocket teeth
- 5.10 Number of teeth
- 5.11 Bore tolerance
- 5.12 Marking
- Annex A (normative) Pitch circle diameters
- Annex B (informative) Equivalent chain designations
- Annex C (informative) Method of calculating chain minimum dynamic strength
- Annex D (informative) Method of determining maximum test force Fmax when conducting dynamic strength conformance test
- Annex E (informative) Examples of methods used to avoid an excessive increase in the rate of stress during the tensile test
- Annex F (informative) Methods used to approximate the minimum dynamic test values for multiplex chains
- Bibliography [Go to Page]
