eLibrary >
BS ISO 4642-1:2015 Rubber and plastics hoses, non-collapsible, for fire-fighting service - Semi-rigid hoses for fixed systems >
Expand All
TOC Search:
BS ISO 4642-1:2015 Rubber and plastics hoses, non-collapsible, for fire-fighting service - Semi-rigid hoses for fixed systems, 2015
- Foreword
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Classification
- 4.1 General
- 4.2 Classification by types (hose construction)
- 4.3 Classification by class (materials for lining and cover)
- 5 Dimensions, tolerances and maximum mass
- 5.1 Inside diameter and maximum mass
- 5.2 Length and tolerances on length
- 6 Performance requirements of finished hose
- 6.1 Hydrostatic requirements
- 6.1.1 Deformation under maximum working pressure
- 6.1.2 Deformation under proof pressure
- 6.1.3 Minimum burst pressure
- 6.1.4 Kink pressure
- 6.2 Adhesion
- 6.3 Accelerated ageing
- 6.4 Low temperature flexibility
- 6.5 Hot surface resistance
- 6.6 Ozone resistance
- 6.7 Bending and crush resistance
- 6.8 UV resistance (xenon arc lamp)
- 6.9 Loss in mass on heating
- 7 Frequency of testing
- 8 Type tests
- 9 Test report
- 10 Recommendation for packaging and storage
- 11 Marking
- Annex A (normative) Kink pressure test
- Annex B (normative) Accelerated ageing test
- Annex C (normative) Hot surface resistance test
- Annex D (normative) Bending and crush resistance test
- Annex E (normative) Type test and routine test
- Annex F (informative) Production test
- Bibliography [Go to Page]
