eLibrary >
BS ISO 16063-32:2016 Methods for the calibration of vibration and shock transducers - Resonance testing. Testing the frequency and the phase response of accelerometers by means of shock excitation >
Expand All
TOC Search:
BS ISO 16063-32:2016 Methods for the calibration of vibration and shock transducers - Resonance testing. Testing the frequency and the phase response of accelerometers by means of shock excitation, 2016
- Foreword
- 1 Scope
- 2 Normative references
- 3 Factors influencing measurement reproducibility
- 4 Apparatus and other devices
- 4.1 Environmental conditions
- 4.2 Reference shock ball
- 4.2.1 General
- 4.2.2 Reference shock ball dimensions
- 4.2.3 Options for the reference shock ball diameter range
- 4.2.4 Requirements for the mounting surface and the thread tolerances of a reference shock ball
- 4.3 Impact ball
- 4.4 Signal analyser
- 4.5 Conditioning amplifier
- 4.6 Auxiliary devices and means
- 5 Procedure
- 5.1 Assembling the structure under test
- 5.1.1 Mounting the accelerometer under test
- 5.1.2 Mounting a reference shock ball
- 5.1.3 Mounting the guidance tube for the impact ball
- 5.2 Connecting the instruments
- 5.3 Setting the signal analyser
- 5.3.1 Initializing the analyser
- 5.3.2 Specifying the measurement parameters
- 5.3.3 Configuring the display
- 5.3.4 Configuring the markers
- 5.4 Testing
- 6 Processing the results
- 6.1 Recording the time signal
- 6.2 Processing the time signal
- 7 Reporting the results
- 7.1 Reporting the measurement results [Go to Page]
