Expand All
TOC Search:
BS EN ISO 16093:2017 Machine tools. Safety. Sawing machines for cold metal, 2018
- undefined [Go to Page]
- Foreword
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 List of significant hazards
- 4.1 General
- 4.2 Main hazard zones
- 5 Safety requirements and/or protective measures
- 5.1 General requirements
- 5.1.1 Guard requirements for all types of sawing machines
- 5.1.2 Modes of operation
- 5.1.3 Control system requirements
- 5.2 Machine types described in this document
- 5.2.1 Band-sawing machines
- 5.2.2 Circular sawing machines
- 5.2.3 Hack-sawing machines — Horizontal-pivot type
- 5.3 Type-specific safeguarding requirements
- 5.3.1 Band-sawing machines (see Figures 1, 2, 3, 4, 5, 6, 7 and 8)
- 5.3.2 Circular sawing machines (see Figures 9, 10, 11, 12, 13, 14, 15 and 16)
- 5.3.3 Hack-sawing machines (see Figure 17)
- 5.4 Other mechanical hazards
- 5.4.1 Mechanical power transmission elements
- 5.4.2 Work material holding devices
- 5.4.3 Power-operated work material clamping devices
- 5.4.4 Power-operated work material loading/unloading and feeding devices
- 5.4.5 Swarf/chip collection and removal systems
- 5.4.6 Preventive maintenance
- 5.5 Electrical hazards
- 5.6 Thermal hazards
- 5.7 Hazards generated by noise
- 5.7.1 Reduction of noise at source
- 5.7.2 Reduction of noise on transmission paths
- 5.8 Hazards generated by vibration
- 5.9 Hazards generated by materials or substances processed
- 5.9.1 Hazards from contact with or inhalation of harmful fluids, gases, mists, fumes and dusts
- 5.9.2 Minimizing biological and microbiological hazards in metalworking fluids
- 5.9.3 Swarf and cleanability
- 5.10 Hazards generated by neglect of ergonomic principles in machinery design
- 5.10.1 Avoidance of unhealthy posture, excessive effort, fatigue and repetitive strain
- 5.10.2 Inadequate consideration of hand-arm or foot-leg anatomy
- 5.10.3 Inadequate local lighting
- 5.10.4 Human error, human behaviour
- 5.10.5 Inadequate design, location or identification of manual controls
- 5.10.6 Inadequate design or location of visual display units
- 5.11 Unexpected start up, unexpected overrun/over-speed
- 5.11.1 Failure/disorder of the control system
- 5.11.2 Restoration of energy supply after an interruption
- 5.11.3 External influences on the electrical equipment
- 5.12 Errors of fitting
- 5.13 Falling or ejected objects or fluids
- 5.13.1 Containment of work material, chips and fluids
- 5.13.2 Ejection of parts — Guard strength
- 5.14 Loss of stability/overturning of machinery
- 5.15 Slip, trip and fall of persons
- 5.15.1 General requirements
- 5.15.2 Contamination of floors
- 5.15.3 High parts of the machine which shall be accessible for maintenance or trouble shooting
- 5.16 Verification of safety requirements and/or measures
- 6 Information for use
- 6.1 Markings
- 6.2 Instruction handbook
- 6.3 Noise declaration
- Annex A (normative) Noise emission measurement
- Annex B (normative) Test conditions for measurement of noise level at sawing machines and work material specifications
- Annex C (informative) Examples of guards for circular sawing machines
- Annex D (informative) Examples for the determination of the performance level
- Bibliography [Go to Page]