eLibrary >
BS EN ISO 11092:2014 Textiles. Physiological effects. Measurement of thermal and water-vapour resistance under steady-state conditions (sweating guarded-hotplate test) >
Expand All
TOC Search:
BS EN ISO 11092:2014 Textiles. Physiological effects. Measurement of thermal and water-vapour resistance under steady-state conditions (sweating guarded-hotplate test), 2014
- Contents Page
- Foreword
- Section sec_1
- Section sec_2
- Section sec_2.1
- Section sec_2.2
- Section sec_2.3
- Section sec_2.4
- Section sec_3
- Section sec_4
- Section sec_5
- Section sec_5.1
- Table tab_b
- Figure fig_1
- Table tab_c
- Figure fig_2
- Section sec_5.2
- Section sec_5.3
- Section sec_6
- Section sec_6.1
- Section sec_6.2
- Section sec_6.2.1
- Figure fig_3
- Section sec_6.2.2
- Section sec_6.2.3
- Section sec_6.2.4
- Section sec_7
- Section sec_7.1
- Section sec_7.1.1
- Section sec_7.1.2
- Section sec_7.1.2.1
- Section sec_7.1.2.2
- Section sec_7.1.2.3
- Section sec_7.1.3
- Section sec_7.1.4
- Section sec_7.2
- Section sec_7.2.1
- Section sec_7.2.2
- Section sec_7.2.3
- Section sec_7.3
- Section sec_7.3.1
- Section sec_7.3.2
- Section sec_7.4
- Section sec_7.4.1
- Section sec_7.4.2
- Section sec_7.4.3
- Section sec_8
- Section sec_8.1
- Section sec_8.2
- Section sec_9
- Annex sec_A
- Annex sec_A.1
- Annex sec_A.2
- Annex sec_A.3
- Annex sec_B
- Annex sec_B.1
- Annex sec_B.2
- Annex sec_B.3
- Annex sec_B.4
- Annex sec_C
- Annex sec_C.1
- Annex sec_C.2
- Table tab_d
- Figure fig_C.1
- Foreword
- Introduction
- 1 Scope
- 2 Terms and definitions
- 3 Symbols and units
- 4 Principle
- 5 Apparatus
- 6 Test specimens
- 6.1 Materials ≤ 5 mm thick
- 6.2 Materials > 5 mm thick
- 7 Test procedure
- 7.1 Determination of apparatus constants
- 7.2 Assembly of test specimens on the measuring unit
- 7.3 Measurement of thermal resistance Rct
- 7.4 Measurement of water-vapour resistance Ret
- 8 Precision of results
- 8.1 Repeatability
- 8.2 Reproducibility
- 9 Test report
- Annex A (normative) Mounting procedure for specimens containing loose filling materials or having uneven thickness
- Annex B (normative) Determination of correction terms for heating power
- Annex C (informative) Guidance on test specimen assembly for materials prone to swelling [Go to Page]