eLibrary >
E127-07 Standard Practice for Fabricating and Checking Aluminum Alloy Ultrasonic Standard Reference Blocks >
Expand All
TOC Search:
E127-07 Standard Practice for Fabricating and Checking Aluminum Alloy Ultrasonic Standard Reference Blocks, 2007
- Scope
- Referenced Documents
- Terminology
- Summary of Practice
- Significance and Use
- Description of Various Recommended Sets
- TABLE 1
- Material
- Quality of Material
- TABLE 2
- TABLE 3
- TABLE 4
- Procedure for Fabricating Blocks
- Procedure for Checking Physical Characteristics of Blocks
- Procedure for Checking Ultrasonic Characteristics of Blocks
- FIG. 1
- FIG. 2
- FIG. 3
- FIG. 4
- FIG. 5
- FIG. 6
- Report
- TABLE 5
- Additional and Equivalent Blocks
- Technical Precaution
- Keywords
- A1. ALTERNATIVE BLOCK-TO-BLOCK CALIBRATION METHOD
- A1.1 Introduction
- A1.2 Application
- A1.3 Method
- A1.4 Apparatus
- A1.5 Calibration Blocks
- A1.6 Procedure
- A1.7 Acceptance Criteria
- A1.8 Report
- A1.9 Precision and Bias
- A2. ALTERNATIVE CALIBRATED GAIN CONTROL METHOD FOR DISTANCE-AMPLITUDE CHECKING
- A2.1 Introduction
- A2.2 Application
- A2.3 Equipment Requirements
- A2.4 Procedure
- TABLE A2.1
- X1. RECOMMENDED TUNING NETWORK FOR LOW CAPACITANCE SEARCH UNITS
- X1.1
- X1.2
- X1.3
- X1.4
- REFERENCES
- FIG. X1.1 [Go to Page]
