eLibrary >
ASSE Standard #1019-2011-Reapproved-2016 Performance Requirements for Wall Hydrant with Backflow Protection and Freeze Resistance >
Expand All
TOC Search:
ASSE Standard #1019-2011-Reapproved-2016 Performance Requirements for Wall Hydrant with Backflow Protection and Freeze Resistance, 2011
- Section I
- 1.0 General
- 1.1 Application
- 1.2 Scope
- 1.3 Reference Standards
- Section II
- 2.0 Test Specimens
- 2.1 Samples Submitted for Test
- 2.2 Samples Tested
- 2.3 Drawings
- 2.4 Rejection
- Section III
- 3.0 Performance Requirements and Compliance Testing
- 3.1 Hydrostatic Pressure Tests
- 3.2 Water Flow Capacity
- 3.3 Deterioration at Maximum Rated Temperature and Pressure
- 3.4 Life Cycle Evaluation
- 3.5 Resistance to Bending
- Figure 1
- 3.6 Self-Draining Capabilities
- Figure 2
- 3.7 Low Head Backpressure
- 3.8 Outlet Pressure Release for Type A and Type B Devices
- Figure 3
- 3.9 Backflow Prevention for Type C Devices
- 3.10 Leakage from Vent Ports
- 3.11 Cross Flow Test (Mixing Hydrant Only
- 3.12 Backsiphonage
- Figure 4
- Figure 5
- Figure 6
- Figure 7
- Figure 8
- Figure 9
- Section IV
- 4.0 Detailed Requirements
- 4.1 Materials
- 4.2 Markings
- 4.3 Installation Instructions
- Section V
- 5.0 Definitions [Go to Page]
