eLibrary >
BS EN 15063-1:2014 Copper and copper alloys. Determination of main constituents and impurities by wavelength dispersive X-ray fluorescence spectrometry (XRF) - Guidelines to the routine method >
Expand All
TOC Search:
BS EN 15063-1:2014 Copper and copper alloys. Determination of main constituents and impurities by wavelength dispersive X-ray fluorescence spectrometry (XRF) - Guidelines to the routine method, 2014
- Contents Page
- Foreword
- Introduction
- 1 Scope
- 2 Principle
- 3 Terms and definitions
- 4 Instrumentation [Go to Page]
- Table 1 — Comparison between end-window and side-window tubes
- Table 2 — Anode materials for X-ray tubes and corresponding fields of application [Go to Page]
- Table 3 — Crystals and their fields of application
- Table 4 — Typical set of crystals for the analysis of copper and copper alloys [Go to Page]
- 5 Sampling and test sample preparation
- 6 Evaluation methods [Go to Page]
- 7 Calibration procedure [Go to Page]
- 8 Method validation (accuracy and precision)
- 9 Performance criteria [Go to Page]
- Table 5 — Example of checks and maintenance work to be carried out on X-ray fluorescence spectrometers
- 10 Radiation protection
- Annex A (informative) Example of calculating background equivalent concentration, limit of detection, limit of quantification and lower limit of detection
- Annex B (informative) Example of calculating line interference of one element to another
- Annex C (informative) Example of performance criteria obtained under repeatability conditions
- Table C.1 — Performance criteria
- Bibliography [Go to Page]