ASTM A328/A328M-07
Historical Standard: ASTM A328/A328M-07 Standard Specification for Steel Sheet Piling
SUPERSEDED (see Active link, below)
ASTM A328 / A328M
1. Scope
1.1 This specification covers carbon steel sheet piling of structural quality for use in the construction of dock walls, sea walls, cofferdams, excavations, and like applications (see Specification A 572/A 572M).
1.2 When the steel is to be welded, it is presupposed that a welding procedure suitable for the grade of steel and intended use or service will be utilized. See Appendix X3 of Specification A 6/A 6M for information on weldability.
1.3 The values stated in either inch-pound units or SI units are to be regarded as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with this specification.
1.4 For sheet piling produced from coil and furnished without heat treatment or with stress relieving only, the additional requirements, including additional testing requirements and the reporting of additional test results, of Specification A 6/A 6M apply.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
ASTM Standards
A6/A6M Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling
A572/A572M Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel
Keywords
carbon; cofferdams; dock walls; excavations; sea walls; sheet piling; steel; structural steel ;
ICS Code
ICS Number Code 77.140.70 (Steel profiles)
DOI: 10.1520/A0328_A0328M-07
ASTM International is a member of CrossRef.